|
« Return to the main Products page
« Return to the Kits Page
- Mating Connector For Stock Socket
- Direct Battery Connection
- Heavy Duty 14 AWG 105C Harness
- 15 Amp ATO Waterproof Fuseholder
- Detailed Color Installation Instructions
- Heated Apparel, Battery Charging, Cell phones, Radar Detectors, GPS Units, Bike-to-Bike Communicators, Portable Music
- 12" And 36" Harness Lengths Are Most Popular (See PDF Fit Chart)
- K 1200 GT, R1200GS and R1200S models built after 08/06 require kit PKT-042-12 which include a Powerlet socket (see the PDF Fit Chart). These models come stock with a new light duty 5 amp plastic socket from BMW (see picture).
 View Fit Chart
- Solves Charging & Heated Clothing Problems
- Use Standard Battery Chargers
- No Need to Buy A Special BMW Charger
- Power Any Brand Heated Clothing
- Capacity: 15 Amp @ 13.8 Volt
- Never Be Left Cold Due To The 5 Amp Limitation Of The Stock CANbus System
- Plug & Play - Simple Instalation 10-15 Minutes
- Socket Will Not Be Switched With The Vehicles Ignition, This Can Be An Advantage For Most GPS Units
- Bypasses The CANbus Without Harm
- PKT-042-xx Replaces the Newer Model BMW Socket With A New Powerlet Socket Kit
- PKT-067-xx Plugs Directly Onto Stock BMW Socket So There Is No Need To Replace The Stock Socket
$29.95
|
Powerlet iCAN Harness For 2005 And Newer BMW's
This product completely solves the battery charging and heated clothing problems that are associated with the CANbus system. The quick installation harness plugs directly onto the back of the stock socket and will not harm or interfere with the vehicles CANbus system. Once the heavy duty harness is installed you can use a standard battery charger and/or power any brand of heated clothing. Our Powerlet iCAN Harness was designed for 2005 and newer BMW motorcycles with the factory 5 amp, switched-ignition CANbus system.
$37.95
|
